DT Swiss FR 571 rims with DT Swiss 350 Ratchet DEG 72t rear hub. Tubeless ready. SRAM XD

Made to order, 5 -7 days for dispatch.

If you have any questions about our wheels or want to double check stock levels please contact us.

Super strong mountain bike wheels with quality components hand built in Bristol. We use the new DT Swiss 350 DEG hubs and the strong and dependable DT Swiss FR 571 rims. We bring both these components together using DT Swiss Competition double butted spokes and Prolock brass nipples. These wheels are set up tubeless ready with DT Swiss tubeless rim tape.

With all of our wheels they are hand built to a high standard within 0.2mm lateral and 0.5mm radial tolerances.

These wheels are built to order and available within 5-7 days once an order is place.

Hubs - DT Swiss 350

DT's workhorse 350 get an high-engagement upgrade with the addition of DEG technology for technical MTB usage

• Based heavily on the 240 DEG, the 350 has a less-machined hub shell and axle, saving considerable CNC time at the cost of a slightly higher weight
• Rapid engagement has become a desirable feature for more technically-orientated riding but many fast-engaging hubs suffered either from high weight, high drag, poor reliability, or all three
• Going back to the drawing board, DT have completely reworked their ratchet system to allow the largest drive ratchets they have ever used, The 350 version offers 72 teeth and 5 degrees of engagement whilst retaining the bombproof reliability of the renowned DT rachet system
• DT are the original ratchet hub innovators, with over 25 years of development and refinement behind it no other manufacturer has matched DT's system for ease of service. reliability and durability
• Tool-free servicing concept make maintenance quick and simple, even mid-ride in a pinch
• The same quad bearing system as used in the 240, with custom DT steel bearings and improved contact-free double flange sealing giving added durability and performance

Rims - DT Swiss FR 571

• Treat the mountain with the disrespect it deserves and get Rude as Hell, the FR 571 can take it
• Whereas the FR 541 is intended as the perfect DH race rim with a careful balance of impact resistance, ride characteristics and weight, the FR 571 goes all-in on pure strength for those who just can't help themselves and value durability above all else
• The result of extensive testing with some of the most destructive riders on the World Cup DH and EWS circuits as well as leading freeriders, this rim isn't for everyone but for the chosen few it will the answer to their prayers
• The 571 adds an extra 80 grams (in 27.5") over the 541, putting more material in places where even the renowned 541 gives way increasing durability to even greater heights, if you break one of these we will want to see the clip
• A fattened bead hook, already well proven on the 541 profile, widens and blunts the area that slams into the tyre during a heavy impact, increasing the force required to split the tyre by 17%, allowing you to go that bit harder
• Included Brass Flat Hex nipples are designed not to pierce rim tape should a spoke snap mid-race run or halfway down a sketchy line
• The included PHR washers increase stiffness and durability with no weight penalty over traditional eyeleted rims
• Available in 32 hole only... naturally
• Weight: 650 grams (27.5 inch) 695 grams (29 inch)
• External Rim Diameter: 561 mm (27.5 inch) 599mm (29 inch)
• Inner Width: 30 mm, outer width: 36 mm, height: 23 mm

Spokes - DT Swiss Competition double butted in black

Nipples - DT Swiss Prolock brass in black

Due to the nature of this product we are not able to offer refunds but all of our hand built wheels come with a workmanship guarantee and free spoke replacement for the life of the wheel.